Isuzu Dmax 2016+/ Mazda BT50 3.0Ltr 2021+ Legendex Exhaust DPF Equipped
3" DPF Back H/D 409 Stainless, 10Yr Offroad WarrantyRated 4/5 based on 1 reviews.
Isuzu DPF-equipped 3L Dmax 2016 Onwards (DPF-back)
Mazda BT50 DPF-equipped 2021 Onwards (DPF-back)
This is Australia's toughest 3" stainless off-road exhaust system, in fact the only exhaust with an off-road warranty. Legendex delivers serious grunt & rumble. That means a more efficient engine for extended engine life, fuel economy and more power, especially when combined with a Legendex Optimizer Remap - and, of course, that commanding presence - that commanding sound that only Legendex delivers.
- Unrivalled 10 years off-road warranty
- 3" 409 (exhaust grade) stainless^
- High-flow stainless packed muffler
- Coated in 800 degree thermal paint
- Heavy duty hangers & brackets
Legendary power gains
Paired with a Legendex Optimizer Remap, your Legendex exhaust will give you the maximum power gains…
Most people aren’t aware that, while the stock DPF restricts exhaust gas flow, adding a high flow Legendex DPF-back exhaust still improves gas flow. This lowers EGTs (lower engine gas temperatures produce greater engine efficiency), extending engine life and, in most vehicles we have tested, delivers measurable power gains. Best of all, the exhaust improves your potential tuning parameters allowing significant power gains when paired with a Legendex Optimizer Remap.
Easier, safer towing
Improved engine efficiency takes the stress out of towing. Hill climbs are easy. Safe, quick overtaking is back on the table. That extra power means safer manoeuvring.
Better fuel economy
Because your engine is more efficient it uses less fuel - typically 8-12% fuel savings. It won't be long before your investment pays for itself.
WARRANTY: 10 years off-road warranty (5yrs +5yrs extended warranty with registration)
PIPE SIZE/MATERIAL: 3" 409 (exhaust grade) stainless. ^A few vehicle systems are 2 1/2” (exhaust grade) stainless.
MUFFLER: Polished 304 grade stainless case with 409 stainless internals. Perforated straight-through high-flow internal design. Stainless wool and fibreglass packing.
SYSTEM FLANGES: 10mm steel plate 2-bolt flanges for maximum clearances and greater system alignment adjustability. Bolts are welded on for easy assembly.
MOUNT POINTS: All factory mount points. Re-use factory rubbers.
HANGERS: Heavy duty hangers & brackets all collar mounted to tube.
SYSTEM COATING: Coated in 800 degree thermal paint for extra protection and reduced external heat transfer.
INCLUDED: Detailed easy-to-follow instructions. System gaskets, nuts & bolts. System components will vary according to which system configuration is chosen.
|Unit Of Measure||each|
Good but disappointing2 April 2021Well manufactured, bolts straight in, unfortunately doesn’t really change the sound due to the restrictions of the dpf